Industrial water analysis: From point of entry to waste water
The majority of industrial manufacturing processes, such as distilling crude oil to refined petroleum products, paper production from wood chips, cracking larger naphtha molecules to ethylene, making polymers from ethylene oxide, power generation, and making high speed microprocessors, all need large quantities of high purity water.
Maintaining a sustainable water program is essential for all major water consuming industries. Routine water testing and monitoring—from source water to waste water discharge—is critical for safe and profitable operation. Routine process water analysis is critical to eliminate corrosion and scaling that can damage valuable industrial components and to ensure regulatory compliance.
Process water quality is an integral part of the industrial manufacturing process. Water quality can change as it passes through a delivery or re-circulation system, so it is important to check for various parameters at point of use—i.e., where it enters the boiler or pretreatment system. Each water sample needs to be tested for multiple parameters, usually by multiple techniques to make sure the produced and reused process water is free of contamination. The table below summarizes the process critical water analysis parameters from feed water to waste water.
By understanding the level of contamination, facility operators can take actions to reduce the damage from corrosion, deposition, and scaling. Industrial water testing is, therefore, essential for quality control and process optimization. Multi-component analysis of corrosive ions, scaling ions, corrosion inhibitors, and corrosion indicators, provides detailed information for successful and predictable utility operation.
Solution for routine and comprehensive water analysis
Recycling and reusing process water increases the sample load of analytical testing labs. Utilizing the proper instruments to help ease your most critical daily applications is the key—regardless of whether you’re in the industrial or in commercial testing lab. Typically, multiple automated traditional wet chemistry analytical methods such as titration, spectrophotometer, ion meter, pH/conductivity meter, and flow injection analyzers (FIA) are used to test several process water parameters. Traditional automated techniques, such as titration and continuous flow analysis, are relatively inflexible: dedicated modules are used for specific chemistries, and dedicated skilled technicians are needed for instrument operation and maintenance. Analyses are time consuming and generate a large volume of reagent waste.
To eliminate corrosion and scaling that can damage valuable industrial components and to ensure regulatory compliance, reliable water analysis must be performed continuously. Daily testing varying concentrations of multiple analytes like, corrosive anions, corrosion inhibitors, corrosion indicators from diverse water samples such as ground water, source water, cooling water, steam condensate, de-mineralized water and waste water puts a heavy burden on your lab resources. The solution to improved productivity is processing many parameters simultaneously with high-throughput analysis and walkaway operation. For industrial process water quality monitoring, Thermo Scientific discrete analyzers, Gallery and Gallery Plus with ECM Module, offer rapid multi parameter testing, unattended high throughput analysis of large sample numbers, and cover a wide concentration range for sample types of varying ionic strengths.
Routine high throughput process water and waste water analysis
The Thermo Scientific Gallery discrete analyzer provides an integrated platform for two measurement techniques, photometric and electrochemical (ECM), which can be run in parallel. Discrete cell technology allows for simultaneous measurement of several different tests for the same sample, eliminating method changeover time. The Gallery system can achieve very low detection levels, and its sophisticated dilution features help to manage a wide concentration range without user intervention.
ECM is an integrated unit into the Gallery discrete analyzers and supports the automated pH and conductivity measurements. It is capable to simultaneously measure both pH and conductivity alongside the photometric testing. ECM is suitable for raw water, ground water, sea water, rainwater, municipal water, drinking water, sewage water, and waste water. It is not suitable for measurement in pure water matrix like DI water or steam condensate.
For laboratories that perform routine process water and waste water analysis while experiencing increased demand for their routine analytical services, the Gallery and Gallery Plus discrete analyzers with ECM module provide increased throughput while lowering the cost per analysis.
Ready-to-use reagent kits for water analysis
Save time by eliminating reagent preparation with the Thermo Scientific Gallery system reagents for environmental testing, such as water (clean water, waste water, soil and sludge digests, effluents, and saline) and industrial (process water) analysis. With over 40 ready-to-use gallery system reagents for environmental analysis, the kits include 1 to 3 reagents in 20 mL barcoded vials, allowing the necessary identification data, such as lot and expiration date, to be read automatically by the discrete analyzer's barcode reader. Automated dilutions make it possible to apply methods for a wide range of analyte concentrations and the test applications are based on recommended standard water and waste water methods used in most countries. Save time and reduce errors by simplifying your analysis with the Gallery system reagents for environmental analysis.
Gallery and Gallery Plus discrete analyzers are easy to use, automated systems that allow laboratories to simplify their testing with the dual benefits of time and cost savings. All necessary analysis steps are automated, providing true walk-away time for the operator. Parallel determination of several analytes along with pH and conductivity from a single sample as well as the presence of several automated features ensures analytical efficiency. Thermo Scientific Gallery discrete analyzers together with ready-to-use system reagents makes the overall process water and waste water analysis simple, accurate and reliable.
List of analytes
|Corrosive anions||Corrosion inhibitors||Corrosion indicators||Basic water analysis parameters||Environmental parameters||Scaling parameters||Organic acids||Nutrients|
|Total Kjedal Nitrogen (TKN)|
Total-Oxidizable Nitrogen (TON)
Free and total cyanide
Solution for routine and comprehensive industrial process water and waste water analysis
The combined power of DISC-IC improves productivity and efficiency in water testing labs, while it consolidates your steam and water chemistry analytical needs.
Rapid Photometric Detection for Environmental Applications
Learn how Discrete Industrial Analyzers work and how the technology can be applied in an environmental laboratory for tests such as pH, alkalinity, conductivity, nitrite, total hardness, silica and total hardness in a variety of sea, natural and waste waters and soil testing.
Automate your wet chemistry analysis
This blog series provide educational resource for the latest applications, technical information on automated wet chemical analysis using discrete analyzers.
A solution to the top three analytical challenges in industrial water and waste water processing
Reliable water analysis is critical to eliminating corrosion and scaling that can damage valuable industrial components and to ensure regulatory compliance. Download the infographic to learn about our solutions to the top three analytical challenges in industrial water and waste water processing.