The Applied Biosystems QuantStudio 6 and 7 Pro real-time PCR systems deliver greater flexibility to support a variety of applications and throughput requirements. The systems’ smart features are designed to reduce contamination by allowing you to set up your run hands-free. Schedule and monitor your run from your mobile device, set-up your experiment, analyze data, and share your results from your computer no matter where it is or where you are.
The QuantStudio 6 and 7 Pro systems’ 96-well blocks incorporate VeriFlex technology for precise temperature control. These blocks are divided into isolated zones that allow separate cycling conditions within the same run -- perfect for optimization. You can also increase your throughput with interchangeable blocks that accommodate 96-well 0.2 ml blocks, 96-well 0.1 ml blocks, 384-well blocks and TaqMan Array Cards (QuantStudio 7 Pro model only). Other unique features of the QuantStudio 7 Pro system include automation compatibility and software features to assist with 21 CFR Part 11 compliance. Many of these features can be added to the QuantStudio 6 Pro system through upgrades to meet changing lab requirements.
In addition to the common features of all QuantStudio systems, the QuantStudio 6 and 7 Pro systems offer:
Monitor experiments and access results remotely using the Instrument Connect app
5 or 6 optical channels (21 filter combinations for QuantStudio 7 Pro system)
Flexibility to change block formats between 96-well (0.1 and 0.2 mL), 384-well, and TaqMan Array cards (QuantStudio 7 Pro model only) with ease by simply pushing a button or using a voice command
Hands-free functionality includes facial authentication login, an RFID reader, and the ability to perform basic operations using voice commands
Data analysis applications that bring together multiple data sets in one convenient place and render them in stunning data visualizations for enhanced analysis and insights
Less waste and fewer resources (uses up to 54% less material than comparable instruments and generates 91% less waste during calibration); energy efficient (consumes up to 26% less energy)
Features that are unique to the QuantStudio 7 Pro system:
Use 5X less sample volume and load up to 384 targets with just 8 pipetting steps in less than 10 minutes. Available with QuantStudio 7 Pro system (upgrade option for the QuantStudio 6 Pro system)
Increase productivity and reduce your manual tasks by adding automatic loading with the pre-configured Thermo Scientific Orbitor RS2 Microplate Mover, or integration with other lab automation.
Included with the QuantStudio 7 Pro system (upgrade option for the QuantStudio 6 Pro system)
Maximize the performance of your QuantStudio 7 Pro system with the following calibration kits.
|Category||Specification||QuantStudio 6 Pro system
||QuantStudio 7 Pro system
||Interchangeable blocks with enhanced motorized change mechanism
|Efficiency and productivity
|Automation for 24/7 auto plate-loading
|Large, full-function touchscreen
|Features to assist with 21 CFR part 11 compliance
||54.7 x 33.8 x 52.5 cm (H x W x D)
||54.7 x 33.8 x 52.5 cm (H x W x D)|
|Minimal calibration for easy maintenance
||On-site installation by professionally trained field service engineers
|SmartStart Orientation hands-on training package
|Faster troubleshooting and resolution with Smart Remote Support tool|
*Can be upgraded
For Research Use Only. Not for use in diagnostic procedures.